HP1200

General Features :

Automatic counting and stacking of offset and rotogravure signatures and any kind of fold (magazine, DP, Din A3, etc...)
Full electronic stacking regulation system (patented)
- Superior log quality even for difficult productions
- Avoid marking on signatures
Infeed pneumatic crusher rollers
- Better fold quality and signature compression
- Optimized stacking quality
Open accessibility to the log in formation. Direct access to the signatures entry point. All operations at floor level.
Dynamic stream gap device for high quality separation between logs.
Shingle stream reconnection.
Stream aligners
Laser counting of signatures
Telescopic gate at the stacker infeed.
Low infeed height for high visibility of shingle stream.
Automatic endboard feeders (capacity: 144)
Positive log transportation and automatic strapping
92 dB horn in case of problem
Telemaintenance system.
CE certification

Label	HP1200
Log length	Between 600 and 1200 mm (*)
Signatures maximum format	490 x 320 mm
Signature minimum format	220 x 150 mm (down to 115 mm with small format kit) (**)
Minimum mechanical cycle time	24 s (following stapper and conditions) (***)
Minimum warranty effective cycle time	30 s
Spine orientation	Spine leading
Infeed height	250 to 550 mm
Log delivery height	1150 mm
Pagination (offset)	4 to 64 pages and more depending on paper weight
Pagination (rotogravure)	12 to 144 pages
Paper weight	40 to 130g/m²
Electrical supply	3 x 400 V (-10% ; +10%), 50 Hz, 25A
Air requirement	Consumption : 5 Nm3/h maxi, Pressure : 6 bars
Weight	4100 kg

Production which associates several extreme features can be impossible (product permitting)
(*) Calculation of the compressed log maximum length must consider endboard thickness, compression rate, and paper thickness variation.
(**) Optional kit for small formats :
Minimum height : 120 mm depending on strapping system.
(***) Minimum mechanical cycle time has been measured in our workshop. To reach such a cycle time needs a perfct knowledge of production parameters by the operators and well maintained equipment following manual instructions.
Only the minimum effective cycle time is warranted.
Others specifications can be available on request following customer's requirements.